By using PC-BNC-G300, PoE signal can convert into coaxial cable with a passive Tx. After passing through remote Rx, PoE signal has converted back to Ethernet port. The Rx can retrieve power from PoE
signal without local power injection. This converter pair can be compatible with IEEE 802.3
af & at and provide >30W /0.75A PoE power to go through RG59 or RG6 coaxial cable. The
transmission distance over RG59 coax cable is up to 250m and 150m for 10 and 100 Mbps
individually.

Features and Benefits:

• Use of existing coax cables for IP camera and other devices speeds up installation and save on labour costs
• Easy to install – no IP and MAC address configuration required
• Full Duplex 10/100 Mbps Data Speed
• Fully transparent to the network